SAFETY REGULATIONS



1. A full 4 post roll cage is required. Rollcage must be cross braced with a minimum of 3 bars in both doors RECOMMENDED but X bar OK in right door. Cage must be minimum of 1 1/2” pipe of .095 thickness. Cage must be cross braced in top with X braces. Must have original floor pan.

2. Gas tanks MUST be in stock position. FUEL CELLS HIGHLY RECOMMENDED (max cap-22 U.S. Gals). MUST be centered - MUST have 10” ground clearance. Gas Tanks/Cells MUST be securely installed (metal 1” straps, bars, etc.) Stock gas tanks may be put in trunk area.

3. FOUR-POINT harness (seat belt and shoulder straps) required at a MINIMUM.

4. Approved helmet ONLY!

Site Contents Copyright ©2008 Batesville Motor Speedway. All rights reserved.
Published by ArkansasSpeedways.com Web Publishing Copyright ©2008